Page 83 - Regent - Electrical Product Guide

WIRING ACCESSORIES
White Wiring Accessories
Klick Lighting - 3 Pin
Klik is a secure lighting and control connection system that provides simultaneous mechanical and electrical connection in one plug.
Luminaires can be connected in seconds in absolute safety, without circuit isolation. All live contacts are inaccessible and the earth connection is made before any other.
Klick AX - 4 Pin
Klik 6A pre-wired plug in ceiling roses are used to coennect luminaires to a fixed wiring installation. Auxiliary contact available, a typical use is for emergency lighting.
Klik 4 pin plugs are used to connect into the klik 4 pin sockets giving a pluggable connection to luminaires.
Pre-Wired Systems
Part No.
Plug-In Ceiling Roses 6A
PCR2000
Description
Dimensions mm
A1
Lighting Part No.
AX Part No.
Pre-Wired Plug-In Ceiling Roses 6A
Ceiling Rose with 0.75mm2 PVC flexible cord.
Length
3 Pin Ceiling Rose Cover
3 Pin Plug
Ultra Flush Socket
Architrave Socket
Round Socket
Ultra Flush Round Socket
75 Dia x 44mm 75 Dia x 44mm
57 x 25 x 25mm
86 x 36 x 1.5mm
86x33x6mm
74 Dia x 7mm
86 Dia x 1.5mm
4-Pin - White
4-Pin - Red
Cover - White
Cover - Red
4 Pin Plug - White
4 Pin Plug - Red
Round Socket
1 Gang Square Socket
74 Dia x 44mm
74 Dia x 44mm
75 Dia x 44mm
75 Dia x 44mm
57 x 55 x 44mm
57 x 55 x 44mm
74 Dia x 7mm
86 x 86 x 9mm
Klik 3 or 4 pin 6A pre-wired plugs are used to connect luminaires to a klik rose or marshalling box.
1 Metre 2 Metre 3 Metre 4 Metre
1 Metre 2 Metre 3 Metre 4 Metre
PCR2000/1.0
PCR2000/2.0
CR64AX/1.0
CR64AX/2.0
A1
PCR2000/3.0
CR64AX/3.0
Plugs 6A
PCR2000/4.0
CR64AX/4.0
P22
A1/R
Pre-Wired Plugs 6A
Ceiling Rose with 0.75mm2 PVC flexible cord.
Socket Outlets 6A
Plugs 6A
S21
P64AX
P22/1.0
P64AX/1.0
S26
P64AXR
P22/2.0
P64AX/2.0
S27
Part No.
Plug-In Ceiling Roses 6A
Socket Outlets 6A
Description
Dimensions mm
CR64AX
CR64AX/R
P22/3.0
P64AX/3.0
S28
S64AX
S26
P22/4.0
P64AX/4.0
For Red AA Plugs add ‘R’ to code e.g. P64AXR/1.0
Lighting, Connection & Controls
Klik marshalling boxes are used in conjunction with Klik 3 and 4 pin plugs to connect luminaires within an area. The Klik marshalling box can be separated into two independently switched circuits. These circuits can be controlled via wall switch or occupancy sensor.
Part No.
KLDS4
KLDS8
Description
4 Outlets
6 Outlets
8 Outlets
10 Outlets
12 Outlets
73 x 222 x 238mm
73 x 222 x 288mm
73 x 222 x 338mm
73 x 222 x 388mm
73 x 222 x 438mm
H x W x D mm
KLDS6
KLDS10
KLDS12
Occupancy Sensors
Hager occupancy sensors come complete with integral photocell and the facility for wall switch override.
• Can be progammed for presence or absense.
• Range 7m diameter for large movements, 5m diameter for small movements.
• Factory presets, lux=400, time=20 min, presence detection.
• EEK001 programming tool is easy to use with 2 memory settings to enable repeatability.
Standard Occupancy Sensor Digital Occupancy Sensor Surface Mount Kit Programming Tool Remote Control
Standard Part No.
EEK510B
EEK520B
Pre-Wired Part No.
EEK513W
EEK523W
Description
EEK005
EEK001
EEK002
Together we generate value
83